SEPTIC SYSTEMS
Frequently Asked Questions
What is a Septic Tank?
Tanks-Septic, Holding and Pump
1,000 Gallon
1,200 Gallon
1,700 Gallon
Two Compartment
1,000/750 Gallon
1,200/1,000 Gallon
1,200 Gallon
Tanks-Grease
Traps
1,000/750 Gallon
1,200 Gallon
1,700 Gallon
Accessories
Infiltrator
Zabel Filters & Accessories
Where Can I Purchase These Products?
Waukesha
Washington
Racine
Milwaukee
Ozaukee
Kenosha
The Infiltrator Chamber System for Septic Leachfields
Standard and High Capacity Infiltrator chambers provide up
to twice the infiltrative capacity of stone and pipe systems.
The Infiltrator Chamber System replaces old-fashioned stone and
pipe leachfields with patented, high-strength polymer chambers. Two
chamber sizes are avaiable. Standard and High Capacity, both designed to
fit in a standard 36" wide trench. Infiltrator chambers sit directly on
the trench bottom. The patented interlocks add strength and latch the
chambers together quickly, end to end, so installation takes less than
half the time of a laborious stone and pipe job.
| Infiltrator chambers may be used for any application that is suitable for stone and pipe. However, by offering greater infiltrative capacity per linear foot, chamber systems can require as little as half the space as conventional systems.* |  |
Open chamber bottom boosts infiltration.
The chamber bottom is completely open, promoting effluent infiltration
into the soil with 100% efficientcy. The open-bottom area, in combination
with the MicroLeaching sidewall, provides maximum infiltrative capacity
for long-term, trouble-free service.
High-density polythylene construction
Infiltrator chambers are molded of high-density PolyTuff polyethylene.
This proprietarty blend, including recycled resins, is formulated for
optimum strength and chemical resistance. It's impervious to wastewater
constituents and is stabilized to resist ultraviolet rays. Infiltrator
chambers are manufactured using and exclusive patented process to assure
consistent high quality.
AASHTO-H-10 and H-20 load ratings.
Infiltrator chambers have been structurally tested by a registered
professional engineer. Both Standard and High Capacity chambers are
available with AASHTO ratings of H-10 (16,000 lb/axle with 12" of
compacted cover) or H-20 (32,000 lb/axle with 18" of compacted cover).
Nominal chamber specifications.
STANDARD CHAMBER:
3' x 6-1/4' x 1'
27 lb.
77 gal.(10.3 cu. ft.)
HIGH CAPACITY CHAMBER:
3" x 6-1/4" x 1-1/3'
33 lb.
122 gal. (16.3 cu. ft.)
Compare the installation and operating advantages.
| Conventional | Infiltrator |
